Extended Q-range small-angle neutron scattering to understand the morphology of proton-exchange membranes: the case of the functionalized syndiotactic-polystyrene model system.

Semi-crystalline polymers exhibit microphase separation into crystalline and amorphous domains characterized by multiple structural levels with sizes ranging from ångströms to hundreds of nanometres. The combination of small-angle (SANS) and wide-angle (WANS) neutron scattering on the same beamline enables reliable in situ characterization of such materials under application-relevant conditions, with the unique advantage of contrast variation by controlled labelling, allowing the structure of such multi-component systems to be resolved in detail. This paper reports a structural analysis performed on deuterated polymer membranes based on syndiotactic polystyrene (sPS) using an extended Q-range SANS and WANS combination, always with the same neutron scattering instrument, either a pinhole SANS diffractometer installed at a research reactor or a 'small- and wide-angle' time-of-flight diffractometer installed at a neutron spallation source. sPS is a semi-crystalline material that becomes hydrophilic and proton conducting when suitable functionalization is achieved by thin film sulfonation, and can form various co-crystalline complexes (clathrates) with small organic molecules stored in the crystalline phase as guests in the vacancies between the polymer helices. Therefore, this material is interesting not only for its conducting properties but also for its versatility as a model system to evaluate the usefulness of extended Q-range neutron scattering in such studies. Variation of neutron contrast was achieved in the amorphous hydrophilic phase by using H2O or D2O to hydrate the membranes and in the crystalline phase by loading the clathrates with deuterated or protonated guest molecules. The experimental approach, the advantages and limitations of the two types of instrumentation used in such analyses, and the main results obtained with respect to the structural characterization of sulfonated sPS membranes under different hydration and temperature conditions are reported, and the potential of this method for similar structural studies on other semi-crystalline polymeric materials is discussed.

Stereoregular Polymerization of Acyclic Terpenes.

The growing environmental pollution and the expected depleting of fossil resources have sparked interest in recent years for polymers obtained from monomers originating from renewable sources. Furthermore, nature can provide a variety of building blocks with special structural features (e. g. side groups or stereo-elements) that cannot be obtained so easily via fossil-based pathways. In this context, terpenes are widespread natural compounds coming from non-food crops, present in a large variety of structures, and ready to use as monomers with or without further modifications. The present review aims to provide an overview of how chemists can stereospecifically polymerize terpenes, particularly the acyclic ones like myrcene, ocimene, and farnesene, using different metal catalyst systems in coordination-insertion polymerization. Attention is also paid to their copolymers, which have recently been disclosed, and to the possible applications of these bio-based materials in various industrial sectors such as in the field of elastomers. © 2021 The Authors. ChemPlusChem published by Wiley-VCH GmbH. This is an open access article under the terms of the Creative Commons Attribution Non-Commercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.

Sustainable Myrcene-Based Elastomers via a Convenient Anionic Polymerization.

Soluble heterocomplexes consisting of sodium hydride in combination with trialkylaluminum derivatives have been used as anionic initiating systems at 100 °C in toluene for convenient homo-, co- and ter-polymerization of myrcene with styrene and isoprene. In this way it has been possible to obtain elastomeric materials in a wide range of compositions with interesting thermal profiles and different polymeric architectures by simply modulating the alimentation feed and the (monomers)/(initiator systems) ratio. Especially, a complete study of the myrcene-styrene copolymers (PMS) was carried out, highlighting their tapered microstructures with high molecular weights (up to 159.8 KDa) and a single glass transition temperature. For PMS copolymer reactivity ratios, rmyr = 0.12 ± 0.003 and rsty = 3.18 ± 0.65 and rmyr = 0.10 ± 0.004 and rsty = 3.32 ± 0.68 were determined according to the Kelen-Tudos (KT) and extended Kelen-Tudos (exKT) methods, respectively. Finally, this study showed an easy accessible approach for the production of various elastomers by anionic copolymerization of renewable terpenes, such as myrcene, with commodities.

The Effects of Temperature and Humidity on the Microstructure of Sulfonated Syndiotactic-polystyrene Ionic Membranes.

Polymeric membranes based on the semi-crystalline syndiotactic-polystyrene (sPS) become hydrophilic, and therefore conductive, following the functionalization of the amorphous phase by the solid-state sulfonation procedure. Because the crystallinity of the material, and thus the mechanical strength of the membranes, is maintained and the resistance to oxidation decomposition can be improved by doping the membranes with fullerenes, the sPS becomes attractive for proton-exchange membranes fuel cells (PEMFC) and energy storage applications. In the current work we report the micro-structural characterization by small-angle neutron scattering (SANS) method of sulfonated sPS films and sPS-fullerene composite membranes at different temperatures between 20 °C and 80 °C, under the relative humidity (RH) level from 10% to 70%. Complementary characterization of membranes was carried out by FTIR, UV-Vis spectroscopy and prompt-γ neutron activation analysis in terms of composition, following the specific preparation and functionalization procedure, and by XRD with respect to crystallinity. The hydrated ionic clusters are formed in the hydrated membrane and shrink slightly with the increasing temperature, which leads to a slight desorption of water at high temperatures. However, it seems that the conductive properties of the membranes do not deteriorate with the increasing temperature and that all membranes equilibrated in liquid water show an increased conductivity at 80 °C compared to the room temperature. The presence of fullerenes in the composite membrane induces a tremendous increase in the conductivity at high temperatures compared to fullerenes-free membranes. Apparently, the observed effects may be related to the formation of additional hydrated pathways in the composite membrane in conjunction with changes in the dynamics of water and polymer.

Synthesis and Characterization of Syndiotactic Polystyrene-Polyethylene Block Copolymer.

The direct synthesis of syndiotactic polystyrene-block-polyethylene copolymer (sPS-b-PE) with a diblock structure has been achieved. The synthetic strategy consists of the sequential stereocontrolled polymerization of styrene and ethylene in the presence of a single catalytic system: cyclopentadienyltitanium(IV) trichloride activated by modified methylaluminoxane (CpTiCl3/MMAO). The reaction conditions suitable for affording the partially living polymerization of these monomers were identified, and the resulting copolymer, purified from contaminant homopolymers, was fully characterized. Gel permeation chromatography coupled with two-dimensional NMR spectroscopy COSY, HSQC, and DOSY confirmed the block nature of the obtained polymer, whose thermal behaviour and thin film morphology were also investigated by differential scanning calorimetry, powder wide angle x-ray diffraction, and atomic force microscopy.

High Conversion of Styrene, Ethylene, and Hydrogen to Linear Monoalkylbenzenes.

1-Alkylbenzenes as a precursor of surfactants, can be produced from ethylene, styrene, and hydrogen. These intermediates, lacking tertiary carbons, are environmentally more benign than commercial ones that bear the aromatic ring linked to an internal carbon of the aliphatic chain. The one-pot synthesis of highly linear 1-alkylbenzenes (LABs) through the homogeneous catalysis of olefin poly-insertion from cheap and largely available reagents can be carried out with a high turnover and selectivity. A purposely designed reactor that allows for the fine control of the three components feed, along with temperature, plays a key role in this achievement. A turnover of 194 g of LABs per mmol of catalyst per hour can be obtained with the simultaneous removal of polyethylene as a by-product.